ESC
HomeBlogiPad Pro 12.9 Battery Replacement: How to Match Parts by Generation and Model Number

Match the A-Number Before Ordering

Start an iPad Pro 12.9 battery replacement order with the A-number on the device and the supplier’s finished-pack reference. The 12.9-inch description covers six generations introduced between 2015 and 2022. A repair business can build one product category for them while keeping individual compatibility records and ordering codes for each approved configuration.

Apple’s identification guide calls out the Model number (on the back cover) and lists Wi-Fi and cellular variants separately. Use it to resolve the generation before checking any supplier listing. If a refurbished housing may have been replaced, resolve conflicting identifiers before allocating a battery. Apple Support — Identify your iPad model.

Six Generations and Their Original Energy Ratings

The table uses the Wi-Fi A-number as a quick reference for each generation. For a cellular device, look up its full A-number in Apple’s identification guide and retain that code on the order. The Wh figures describe the built-in batteries in Apple’s device specifications.

Generation Introduced Wi-Fi A-number Apple original battery energy
1st 2015 A1584 38.5 Wh
2nd 2017 A1670 41 Wh
3rd 2018 A1876 36.71 Wh
4th 2020 A2229 36.71 Wh
5th 2021 A2378 40.88 Wh
6th 2022 A2436 40.88 Wh

Two pairs in the table have equal published energy. Use those figures to compare device specifications, then verify assembly dimensions, contact position and electrical requirements independently for each model. Keep the 13-inch iPad Pro in a separate catalog family so searches for a large-screen iPad do not pull the wrong stock.

How to Read the A1584 Battery Capacity

Apple’s first-generation technical specification lists 38.5 Wh. Its 2015 Product Environmental Report separately lists 38.8 Whr in the battery chemistry entry. The two documents give different figures. Keep each attached to its source and use the technical specification consistently for the generation table. Ask the supplier for the declared energy of the exact replacement pack offered for A1584. Apple Support — First-generation iPad Pro technical specifications and Apple — 12.9-inch iPad Pro Product Environmental Report.

To compare a quote in mAh with another in Wh, request the nominal voltage for the finished pack. Multiply amp-hours by that voltage to calculate the equivalent declared energy. For example, a hypothetical 10,000 mAh pack at 3.8 V works out to 38 Wh. Use that arithmetic to reconcile quote fields. For measured acceptance, ask for results tied to the sample ID, test temperature, discharge method and cutoff. Compare like-for-like results from the same agreed method.

How to Qualify a Shared Battery Listing

Separate approval for two iPad generations

A supplier may list a single battery against both the 2021 and 2022 generations. For iPad Pro battery compatibility, request one application row per claimed model code and one controlled revision for the proposed tablet battery assembly. A2378 and A2436 should have separate installation records even if the supplier gives both the same ordering reference. Verify cellular variants within the intended scope as well.

  • Check the supplied build. Compare the finished outline, thickness, contact location and orientation, insulation and adhesive scope with the approved specification. Request sample photos and retain them with the part revision.
  • Check the electrical declaration. Record nominal voltage, energy and applicable charging limits. Have qualified staff confirm the protection and sensing configuration against the intended application.
  • Validate each device application. Have a trained technician evaluate seating, clearance, charge behaviour and stability on the intended device. Record the iPadOS version, adapter and cable, test conditions and observations.
  • Control repeat orders. Tie the approval to the supplier’s part number and revision. Require review when the cell, electrical interface, insulation or adhesive arrangement changes.

If the supplier can demonstrate only one application, release that application and hold the others for evidence. For an intermittent charge fault, compare the same device with a known-good cable and adapter and document the starting charge level. If the issue persists, use the repair team’s diagnostic process before attributing it to the pack.

Buy Against the Repair Queue

For iPad battery bulk sourcing, forecast by verified device code and translate that forecast into approved finished-pack orders. For example, an illustrative intake of 18 A1584 units, 24 A1876 units and 36 A2378 units gives a 78-device queue. If diagnosis confirms battery work for 11, 16 and 25 units respectively, the immediate demand is 52 packs allocated across those three applications. Use your own diagnostic yield, available released stock and lead times to set the order quantities.

Keep unapproved, held and superseded stock out of available inventory. For low-turn models, request pack dates and lot-level quantities before committing to a larger minimum order. Compare the landed cost of smaller repeat lots with the cost of retesting and potentially writing off old stock. Adapt ESCCharge’s phone-battery examples to the tablet pack’s own inspection limits and storage requirements. ESCCharge sampling plan and ESCCharge warehouse storage guide.

Keep Application Approval Separate From Lot Release

Application approval tells the repair team where it can use a particular assembly revision. Lot release tells the warehouse which shipment it can issue. Link the two records through the approved part reference, revision and supplier lot. At receiving, reconcile the unit and carton labels before drawing samples. If a mixed carton contains two revisions, separate them so the results from one revision cannot accidentally clear the other.

For example, assume a supplier has qualified one assembly for A2378 and A2436, then sends a second lot with a revised contact arrangement. Place that lot on hold while engineering compares the new arrangement with the approved build and decides what to retest on each device. Keep unaffected released stock available. If only the A2378 evaluation is complete, the inventory record should restrict the new revision to A2378 until the A2436 evaluation is signed off.

At the repair bench, link the issued lot to the work order and record what happened after installation. If returns cluster around one device code or revision, that record lets quality staff narrow the investigation and preserve stock with unrelated approvals.

What to Put in the RFQ

Send one line per device application with the generation, exact A-number, required quantity and intended market. Ask the supplier to return the finished part number and revision, nominal voltage and Wh, photos or drawings, a list of included adhesive and other consumables, sample test evidence and lot traceability. Confirm the pack date, packaging and order terms for each quote. Request separate approval for any substitute configuration. ESCCharge tablet and laptop battery range.

Frequently Asked Questions

Is A1584 a battery part number?

A1584 identifies the Wi-Fi first-generation device. Record it in the device field and put the supplier’s finished battery reference and revision on a separate line.

Can I buy a single pack for the 5th and 6th generations?

Approve a common pack only when the same finished revision has passed evaluation for each model code you intend to service. Keep independent records so purchasing knows exactly which variants it can release.

Why can an apparently correct replacement quote still be incomplete?

The quoted unit may be a finished battery only. Confirm any adhesive or other consumables separately and compare the number of complete repair sets you can actually issue.

Send ESCCharge your A-number list, quantities and required kit contents to discuss sample evaluation and a model-specific quote. Confirm availability and order terms for each requested assembly.

External Source References

Get Your Exclusive Quote!
Contact us now for instant support and personalized service!

EXPERT CONTRIBUTOR

Abby Wang

Founder of ESC | 13+ Years in Mobile Accessories

With over 13 years of deep-rooted expertise in the mobile accessories industry, I have dedicated my career to more than just selling products—I bridge the gap between complex technology and evolving market needs. In 2022, I founded Shenzhen ESC Technology and launched ESC, a brand built on the principle: "Always On. Value Of Limitless Time." My journey includes partnering with 150+ major clients across 50 countries, specializing in high-stakes negotiations and long-term account management. What sets my approach apart is a rare blend of technical proficiency and market intuition. At ESC, we don't just meet demand; we anticipate it. Our mission is to lead the market by creating value-driven solutions that empower our global partners to stay ahead in a fast-paced digital landscape. Let's connect to power the future of mobile energy.
View Youtube Profile
Minimum Order: 10 Units
WeChat QR Code